Furnace Repair and hvac repair Severance Services
One truck, one call, and the full range of furnace work: repair, replacement, tune-ups, safety inspections and brand-specific service. We cover every ZIP in our service area, from 80650 in town out to 80550 and 80610.
- 24Services from one local team
- 15Areas served around Severance
- Test firstMeter and combustion readings before any quote
- Plain notesWhat failed, why, and what it costs
Furnace Repair and hvac repair Severance Services
One truck, one call, and the full range of furnace work: repair, replacement, tune-ups, safety inspections and brand-specific service.
Furnace Repair
Diagnostic-first repair for no-heat calls, short cycling and weak airflow.
Furnace Replacement
When a cracked heat exchanger or a failed blower motor makes repair the wrong money, we size and swap the unit.
Furnace Installation
New furnace installs for Severance homes, including gas line checks, flue connections and thermostat wiring.
Emergency Furnace Repair
Emergency hvac repair Severance CO homeowners call at 2 a.m. in January. No heat with a house full of kids is not a wait-until-Monday problem.
Gas Furnace Repair
Gas valve testing, pilot and ignition faults, and combustion analysis with a flue gas analyzer.
Electric Furnace Repair
Heating element, sequencer and capacitor failures on electric furnaces. We meter each element and the blower circuit, then replace only what tests bad.
Commercial Furnace Repair
Rooftop and shop-unit furnace service for Severance businesses and Weld County shops.
Propane Furnace Repair
Propane furnaces run hotter and sootier than natural gas, so we check the heat exchanger and burner orifices closely.
Furnace Maintenance
Annual maintenance that catches dirty flame sensors, worn capacitors and clogged filters before they strand you in a cold snap.
Furnace Tune-Up
A tune-up is the cheap insurance on a furnace.
Furnace Inspection
Full inspection covering heat exchanger, flue, gas connections and electrical.
Furnace Cleaning
Burner, blower wheel and cabinet cleaning for furnaces that have pulled years of Weld County dust. A dirty blower motor runs hot and dies early.
Furnace Blower Motor Repair
A failed blower motor means no air, even with the burners lit.
Furnace Control Board Repair
Faulty control boards cause random shutdowns and error codes that make no sense.
Furnace Ignition Repair
The igniter cracks, the sensor coats with carbon, and the furnace locks out.
Furnace Pilot Light Repair
A pilot light that will not stay lit usually means a bad thermocouple or a dirty orifice.
Furnace Heat Exchanger Repair
Cracked heat exchangers are a safety issue, not a comfort issue.
Furnace Thermostat Repair
Thermostats that read wrong, lose schedule or click without calling for heat.
Furnace Safety Inspection
CO testing, gas leak checks, flue draft verification and heat exchanger inspection. We follow OSHA safety compliance on every visit and document the readings.
Carrier Furnace Repair
Carrier units have their own board codes and igniter quirks. We carry common Carrier parts and know the fault sequences.
Trane Furnace Repair
Trane furnaces are solid until the igniter or inducer motor goes. We test the pressure switch circuit and the inducer amp draw, then replace what failed.
Goodman Furnace Repair
Goodman systems are common in Weld County and parts are easy to source.
Rheem Furnace Repair
Rheem and Ruud furnaces share most components, and we stock the common ones. Control board faults and blower capacitor failures top the list.
Furnace Repair Cost Guide
We quote repair work before we start, with the diagnostic fee credited toward the job. Replacement quotes are itemized by unit, labor and any duct work.
How Our Furnace Repair Calls Run
From the first phone call to the final combustion check, here is what to expect when you book furnace work with us in Severance.
-
Step 1
Call and triage
You describe the symptom: no heat, cold air, banging noise or a furnace that will not turn on.
-
Step 2
Test and diagnose
The tech meters the igniter, checks the flame sensor, reads gas pressure with a manometer and runs a combustion analysis. You get the failed part named and the repair price before any work starts.
-
Step 3
Repair and verify
We replace the failed component, then run the furnace through a full cycle. Temperature rise, amp draw and flue readings get checked again.
-
Step 4
Walkthrough and log
Before we leave, you get a plain-language rundown of what failed and why, plus the filter size and schedule for your unit. Any follow-up parts we had to order get scheduled on the spot.
Furnace Repair Severance CO Questions
The questions we get most on the phone, answered straight. If yours is not here, call and we will talk it through.
Describe what you are seeing and we will point you to the right next step.
(970) 1234567The right shop is the one that tests before it quotes. Ask whether they use a combustion analyzer and an inspection camera, whether the diagnostic fee is credited toward the repair, and whether they stock common parts for your brand.
Yes. No-heat calls do not wait for business hours, and neither do we. If your furnace quits at 2 a.m. in a January cold snap, call (970) 1234567 and we triage the situation on the phone. Emergency calls get priority scheduling, and we bring the common failure parts so most emergency visits close in one trip.
Check three things: whether they diagnose with real instruments instead of guessing, whether they quote the repair before starting, and whether they carry parts for your furnace brand. A tech who meters the igniter and reads flue gas will find the actual fault. One who skips straight to a replacement quote is selling, not repairing.
Yes, and it covers the whole Weld County corridor, from Severance out to Windsor, Eaton and Greeley. Emergency calls get triaged on the phone so we know what parts to load. If you smell gas or see soot around the furnace, leave the house and call from outside before anything else.
Get Furnace Repair Severance CO Before the Next Freeze
(970) 1234567No heat is not a wait-and-see problem in a Colorado winter.
Call for Furnace Repair in Severance
Call (970) 1234567 and describe what your furnace is doing. We answer, triage the symptom and give you a two-hour arrival window. Regular hours run 8 a.m. to 6 p.m. Monday through Friday, with emergency coverage for no-heat calls. If you are in ZIP 80650, 80546, 80550 or 80610, you are in our regular service area.